*motion.txt* For Vim version 6.3. Last change: 2004 May 13 VIM REFERENCE MANUAL by Bram Moolenaar Cursor motions *cursor-motions* *navigation* These commands move the cursor position. If the new position is off of the screen, the screen is scrolled to show the cursor (see also 'scrolljump' and 'scrolloff' options). 1. Motions and operators |operator| 2. Left-right motions |left-right-motions| 3. Up-down motions |up-down-motions| 4. Word motions |word-motions| 5. Text object motions |object-motions| 6. Text object selection |object-select| 7. Marks |mark-motions| 8. Jumps |jump-motions| 9. Various motions |various-motions| General remarks: If you want to know where you are in the file use the "CTRL-G" command |CTRL-G| or the "gCTRL-G" command |g_CTRL-G|. If you set the 'ruler' option, the cursor position is continuously shown in the status line (which slows down Vim a little). Experienced users prefer the hjkl keys because they are always right under their fingers. Beginners often prefer the arrow keys, because they do not know what the hjkl keys do. The mnemonic value of hjkl is clear from looking at the keyboard. Think of j as an arrow pointing downwards. The 'virtualedit' option can be set to make it possible to move the cursor to positions where there is no character or halfway a character.
1. Motions and operators *operator* The motion commands can be used after an operator command, to have the command operate on the text that was moved over. That is the text between the cursor position before and after the motion. Operators are generally used to delete or change text. The following operators are available: |c| c change |d| d delete |y| y yank into register (does not change the text) |~| ~ swap case (only if 'tildeop' is set) |g~| g~ swap case |gu| gu make lowercase |gU| gU make uppercase |!| ! filter through an external program |=| = filter through 'equalprg' or C-indenting if empty |gq| gq text formatting |g?| g? ROT13 encoding |>| > shift right |<| < shift left |zf| zf define a fold If the motion includes a count and the operator also had a count before it, the two counts are multiplied. For example: "2d3w" deletes six words. After applying the operator the cursor is mostly left at the start of the text that was operated upon. For example, "yfe" doesn't move the cursor, but "yFe" moves the cursor leftwards to the "e" where the yank started. *linewise* *characterwise* The operator either affects whole lines, or the characters between the start and end position. Generally, motions that move between lines affect lines (are linewise), and motions that move within a line affect characters (are characterwise). However, there are some exceptions. *exclusive* *inclusive* A character motion is either inclusive or exclusive. When inclusive, the start and end position of the motion are included in the operation. When exclusive, the last character towards the end of the buffer is not included. Linewise motions always include the start and end position. Which motions are linewise, inclusive or exclusive is mentioned below. There are however, two general exceptions: 1. If the motion is exclusive and the end of the motion is in column 1, the end of the motion is moved to the end of the previous line and the motion becomes inclusive. Example: "}" moves to the first line after a paragraph, but "d}" will not include that line. 2. If the motion is exclusive, the end of the motion is in column 1 and the start of the motion was at or before the first non-blank in the line, the motion becomes linewise. Example: If a paragraph begins with some blanks and you do "d}" while standing on the first non-blank, all the lines of the paragraph are deleted, including the blanks. If you do a put now, the deleted lines will be inserted below the cursor position.Notethat when the operator is pending (the operator command is typed, but the motion isn't yet), a special set of mappings can be used. See |:omap|. Instead of first giving the operator and then a motion you can use Visual mode: mark the start of the text with "v", move the cursor to the end of the text that is to be affected and then hit the operator. The text between the start and the cursor position is highlighted, so you can see what text will be operated upon. This allows much more freedom, but requires more key strokes and has limited redo functionality. See the chapter on Visual mode |Visual-mode|. You can use a ":" command for a motion. For example "d:call FindEnd()". But this can't be redone with "." if the command is more than one line. This can be repeated:d:call search("f")This cannot be repeated:<CR>d:if 1<CR>call search("f")<CR>endif<CR>FORCING A MOTION TO BE LINEWISE, CHARACTERWISE OR BLOCKWISE When a motion is not of the type you would like to use, you can force another type by using "v", "V" orCTRL-Vjust after the operator. Example:djdeletes two linesdvjdeletes from the cursor position until the character below the cursorddeletes the character under the cursor and the character below the cursor.<C-V>jBe careful with forcing a linewise movement to be used characterwise or blockwise, the column may not always be defined. *o_v* v When used after an operator, before the motion command: Force the operator to work characterwise, also when the motion is linewise. If the motion was linewise, it will become |exclusive|. If the motion already was characterwise, toggle inclusive/exclusive. This can be used to make an exclusive motion inclusive and an inclusive motion exclusive. *o_V* V When used after an operator, before the motion command: Force the operator to work linewise, also when the motion is characterwise. *o_CTRL-V*CTRL-VWhen used after an operator, before the motion command: Force the operator to work blockwise. This works like Visual block mode selection, with the corners defined by the cursor position before and after the motion.
2. Left-right motions *left-right-motions* h or *h*<Left>or *<Left>*CTRL-Hor *CTRL-H* *<BS>*<BS>[count]characters to the left. |exclusive| motion.Note:If you prefer<BS>to delete a character, use the mapping: :mapCTRL-V<BS>X (to enter "CTRL-V<BS>" type theCTRL-Vkey, followed by the<BS>key) See |:fixdel| if the<BS>key does not do what you want. l or *l*<Right>or *<Right>* *<Space>*<Space>[count]characters to the right. |exclusive| motion. *0* 0 To the first character of the line. |exclusive| motion. When moving up or down, stay in same screen column (if possible). *<Home>* *<kHome>*<Home>To the first character of the line. |exclusive| motion. When moving up or down, stay in same text column (if possible). Works like "1|", which differs from "0" when the line starts with a<Tab>. {not in Vi} *^* ^ To the first non-blank character of the line. |exclusive| motion. *$* *<End>* *<kEnd>* $ or<End>To the end of the line. When a count is given also go [count - 1] lines downward |inclusive|. In Visual mode the cursor goes to just after the last character in the line. When 'virtualedit' is active, "$" may move the cursor back from past the end of the line to the last character in the line. *g_* g_ To the last non-blank character of the line and [count - 1] lines downward |inclusive|.{not in Vi}*g0* *g<Home>* g0 or g<Home>When lines wrap ('wrap' on): To the first character of the screen line. |exclusive| motion. Differs from "0" when a line is wider than the screen. When lines don't wrap ('wrap' off): To the leftmost character of the current line that is on the screen. Differs from "0" when the first character of the line is not on the screen.{not in Vi}*g^* g^ When lines wrap ('wrap' on): To the first non-blank character of the screen line. |exclusive| motion. Differs from "^" when a line is wider than the screen. When lines don't wrap ('wrap' off): To the leftmost non-blank character of the current line that is on the screen. Differs from "^" when the first non-blank character of the line is not on the screen. {not in Vi} *gm* gm Like "g0", but half a screenwidth to the right (or as much as possible).{not in Vi}*g$* *g<End>* g$ or g<End>When lines wrap ('wrap' on): To the last character of the screen line and [count - 1] screen lines downward |inclusive|. Differs from "$" when a line is wider than the screen. When lines don't wrap ('wrap' off): To the rightmost character of the current line that is visible on the screen. Differs from "$" when the last character of the line is not on the screen or when a count is used. Additionally, vertical movements keep the column, instead of going to the end of the line.{not in Vi}*bar* | To screen column[count]in the current line. |exclusive| motion. *f* f{char}To[count]'th occurrence of{char}to the right. The cursor is placed on{char}|inclusive|.{char}can be entered as a digraph |digraph-arg|. When 'encoding' is set to Unicode, composing characters may be used, see |utf-8-char-arg|. |:lmap| mappings apply to{char}. The CTRL-^ command in Insert mode can be used to switch this on/off |i_CTRL-^|. *F* F{char}To the[count]'th occurrence of{char}to the left. The cursor is placed on{char}|inclusive|.{char}can be entered like with the |f| command. *t* t{char}Till before[count]'th occurrence of{char}to the right. The cursor is placed on the character left of{char}|inclusive|.{char}can be entered like with the |f| command. *T* T{char}Till after[count]'th occurrence of{char}to the left. The cursor is placed on the character right of{char}|inclusive|.{char}can be entered like with the |f| command. *;* ; Repeat latest f, t, F or T[count]times. *,* , Repeat latest f, t, F or T in opposite direction[count]times. These commands move the cursor to the specified column in the current line. They stop at the first column and at the end of the line, except "$", which may move to one of the next lines. See 'whichwrap' option to make some of the commands move across line boundaries.
3. Up-down motions *up-down-motions* k or *k*<Up>or *<Up>* *CTRL-P*CTRL-P[count]lines upward |linewise|. j or *j*<Down>or *<Down>*CTRL-Jor *CTRL-J*<NL>or *<NL>* *CTRL-N*CTRL-N[count]lines downward |linewise|. gk or *gk* *g<Up>* g<Up>[count]display lines upward. |exclusive| motion. Differs from 'k' when lines wrap, and when used with an operator, because it's not linewise.{not in Vi}gj or *gj* *g<Down>* g<Down>[count]display lines downward. |exclusive| motion. Differs from 'j' when lines wrap, and when used with an operator, because it's not linewise.{not in Vi}*-* -<minus>[count]lines upward, on the first non-blank character |linewise|. + or *+*CTRL-Mor *CTRL-M* *<CR>*<CR>[count]lines downward, on the first non-blank character |linewise|. *_* _<underscore>[count]- 1 lines downward, on the first non-blank character |linewise|. *G* G Goto line[count], default last line, on the first non-blank character |linewise|. If 'startofline' not set, keep the same column. *<C-End>*<C-End>Goto line[count], default last line, on the last character |inclusive|.{not in Vi}<C-Home>or *gg* *<C-Home>* gg Goto line[count], default first line, on the first non-blank character |linewise|. If 'startofline' not set, keep the same column. :[range]Set the cursor on the specified line number. If there are several numbers, the last one is used. *N%*{count}% Go to{count}percentage in the file, on the first non-blank in the line |linewise|. To compute the new line number this formula is used: ({count}* number-of-lines + 99) / 100 See also 'startofline' option.{not in Vi}:[range]go[to][count]*:go* *:goto* *go*[count]go Go to{count}byte in the buffer. Default[count]is one, start of the file. When giving[range], the last number in it used as the byte count. End-of-line characters are counted depending on the current 'fileformat' setting.{not in Vi}{not available when compiled without the |+byte_offset| feature} These commands move to the specified line. They stop when reaching the first or the last line. The first two commands put the cursor in the same column (if possible) as it was after the last command that changed the column, except after the "$" command, then the cursor will be put on the last character of the line.
4. Word motions *word-motions*<S-Right>or *<S-Right>* *w* w[count]words forward. |exclusive| motion.<C-Right>or *<C-Right>* *W* W[count]WORDS forward. |exclusive| motion. *e* e Forward to the end of word[count]|inclusive|. *E* E Forward to the end of WORD[count]|inclusive|.<S-Left>or *<S-Left>* *b* b[count]words backward. |exclusive| motion.<C-Left>or *<C-Left>* *B* B[count]WORDS backward. |exclusive| motion. *ge* ge Backward to the end of word[count]|inclusive|. *gE* gE Backward to the end of WORD[count]|inclusive|. These commands move over words or WORDS. *word* A word consists of a sequence of letters, digits and underscores, or a sequence of other non-blank characters, separated with white space (spaces, tabs,<EOL>). This can be changed with the 'iskeyword' option. *WORD* A WORD consists of a sequence of non-blank characters, separated with white space. An empty line is also considered to be a word and a WORD. A sequence of folded lines is counted for one word of a single character. "w" and "W", "e" and "E" move to the start/end of the first word or WORD after a range of folded lines. "b" and "B" move to the start of the first word or WORD before the fold. Special case: "cw" and "cW" are treated like "ce" and "cE" if the cursor is on a non-blank. This is because "cw" is interpreted as change-word, and a word does not include the following white space. {Vi: "cw" when on a blank followed by other blanks changes only the first blank; this is probably a bug, because "dw" deletes all the blanks} Another special case: When using the "w" motion in combination with an operator and the last word moved over is at the end of a line, the end of that word becomes the end of the operated text, not the first word in the next line. The original Vi implementation of "e" is buggy. For example, the "e" command will stop on the first character of a line if the previous line was empty. But when you use "2e" this does not happen. In Vim "ee" and "2e" are the same, which is more logical. However, this causes a small incompatibility between Vi and Vim.
5. Text object motions *object-motions* *(* ([count]sentences backward. |exclusive| motion. *)* )[count]sentences forward. |exclusive| motion. *{* {[count]paragraphs backward. |exclusive| motion. *}* }[count]paragraphs forward. |exclusive| motion. *]]* ]][count]sections forward or to the next '{' in the first column. When used after an operator, then the '}' in the first column. |linewise| *][* ][[count]sections forward or to the next '}' in the first column. |linewise| *[[* [[[count]sections backward or to the previous '{' in the first column. |linewise| *[]* [][count]sections backward or to the previous '}' in the first column. |linewise| These commands move over three kinds of text objects. *sentence* A sentence is defined as ending at a '.', '!' or '?' followed by either the end of a line, or by a space or tab. Any number of closing ')', ']', '"' and ''' characters may appear after the '.', '!' or '?' before the spaces, tabs or end of line. A paragraph and section boundary is also a sentence boundary. If the 'J' flag is present in 'cpoptions', at least two spaces have to follow the punctuation mark;<Tab>s are not recognized as white space. The definition of a sentence cannot be changed. *paragraph* A paragraph begins after each empty line, and also at each of a set of paragraph macros, specified by the pairs of characters in the 'paragraphs' option. The default is "IPLPPPQPP LIpplpipbp", which corresponds to the macros ".IP", ".LP", etc. (These are nroff macros, so the dot must be in the first column). A section boundary is also a paragraph boundary.Notethat this does not include a '{' or '}' in the first column. Alsonotethat a blank line (only containing white space) is NOT a paragraph boundary. *section* A section begins after a form-feed (<C-L>) in the first column and at each of a set of section macros, specified by the pairs of characters in the 'sections' option. The default is "SHNHH HUnhsh", which defines a section to start at the nroff macros ".SH", ".NH", ".H", ".HU", ".nh" and ".sh". The "]" and "[" commands stop at the '{' or '}' in the first column. This is useful to find the start or end of a function in a C program.Notethat the first character of the command determines the search direction and the second character the type of brace found. If your '{' or '}' are not in the first column, and you would like to use "[[" and "]]" anyway, try these mappings::map [[ ?{<CR>w99[{:map ][ /}<CR>b99]}:map ]] j0[[%/{<CR>:map [] k$][%?}[type these literally, see |<>|]<CR>
6. Text object selection *object-select* *text-objects* *v_a* *v_i* This is a series of commands that can only be used while in Visual mode or after an operator. The commands that start with "a" select "a"n object including white space, the commands starting with "i" select an "inner" object without white space, or just the white space. Thus the "inner" commands always select less text than the "a" commands. These commands are{not in Vi}. These commands are not available when the |+textobjects| feature has been disabled at compile time. *v_aw* *aw* aw "a word", select[count]words (see |word|). Leading or trailing white space is included, but not counted. When used in Visual linewise mode "aw" switches to Visual characterwise mode. *v_iw* *iw* iw "inner word", select[count]words (see |word|). White space between words is counted too. When used in Visual linewise mode "iw" switches to Visual characterwise mode. *v_aW* *aW* aW "a WORD", select[count]WORDs (see |WORD|). Leading or trailing white space is included, but not counted. When used in Visual linewise mode "aW" switches to Visual characterwise mode. *v_iW* *iW* iW "inner WORD", select[count]WORDs (see |WORD|). White space between words is counted too. When used in Visual linewise mode "iW" switches to Visual characterwise mode. *v_as* *as* as "a sentence", select[count]sentences (see |sentence|). When used in Visual mode it is made characterwise. *v_is* *is* is "inner sentence", select[count]sentences (see |sentence|). When used in Visual mode it is made characterwise. *v_ap* *ap* ap "a paragraph", select[count]paragraphs (see |paragraph|). Exception: a blank line (only containing white space) is also a paragraph boundary. When used in Visual mode it is made linewise. *v_ip* *ip* ip "inner paragraph", select[count]paragraphs (see |paragraph|). Exception: a blank line (only containing white space) is also a paragraph boundary. When used in Visual mode it is made linewise. a] *v_a]* *v_a[* *a]* *a[* a[ "a [] block", select[count]'[' ']' blocks. This goes backwards to the[count]unclosed '[', and finds the matching ']'. The enclosed text is selected, including the '[' and ']'. When used in Visual mode it is made characterwise. i] *v_i]* *v_i[* *i]* *i[* i[ "inner [] block", select[count]'[' ']' blocks. This goes backwards to the[count]unclosed '[', and finds the matching ']'. The enclosed text is selected, excluding the '[' and ']'. When used in Visual mode it is made characterwise. a) *v_a)* *a)* *a(* a( *v_ab* *v_a(* *ab* ab "a block", select[count]blocks, from "[count][(" to the matching ')', including the '(' and ')' (see |[(|). Does not include white space outside of the parenthesis. When used in Visual mode it is made characterwise. i) *v_i)* *i)* *i(* i( *v_ib* *v_i(* *ib* ib "inner block", select[count]blocks, from "[count][(" to the matching ')', excluding the '(' and ')' (see |[(|). When used in Visual mode it is made characterwise. a> *v_a>* *v_a<* *a>* *a<* a< "a <>block", select[count]<>blocks, from the[count]'th unmatched '<' backwards to the matching '>', including the '<' and '>'. When used in Visual mode it is made characterwise. i> *v_i>* *v_i<* *i>* *i<* i< "inner <>block", select[count]<>blocks, from the[count]'th unmatched '<' backwards to the matching '>', excluding the '<' and '>'. When used in Visual mode it is made characterwise. a} *v_a}* *a}* *a{* a{ *v_aB* *v_a{* *aB* aB "a Block", select[count]Blocks, from "[count][{" to the matching '}', including the '{' and '}' (see |[{|). When used in Visual mode it is made characterwise. i} *v_i}* *i}* *i{* i{ *v_iB* *v_i{* *iB* iB "inner Block", select[count]Blocks, from "[count][{" to the matching '}', excluding the '{' and '}' (see |[{|). When used in Visual mode it is made characterwise. When used after an operator: For non-block objects: For the "a" commands: The operator applies to the object and the white space after the object. If there is no white space after the object or when the cursor was in the white space before the object, the white space before the object is included. For the "inner" commands: If the cursor was on the object, the operator applies to the object. If the cursor was on white space, the operator applies to the white space. For a block object: The operator applies to the block where the cursor is in, or the block on which the cursor is on one of the braces. For the "inner" commands the surrounding braces are excluded. For the "a" commands, the braces are included. When used in Visual mode: When start and end of the Visual area are the same (just after typing "v"): One object is selected, the same as for using an operator. When start and end of the Visual area are not the same: For non-block objects the area is extended by one object or the white space up to the next object, or both for the "a" objects. The direction in which this happens depends on which side of the Visual area the cursor is. For the block objects the block is extended one level outwards. For illustration, here is a list of delete commands, grouped from small to big objects.Notethat for a single character and a whole line the existing vi movement commands are used. "dl" delete character (alias: "x") |dl| "diw" delete inner word *diw* "daw" delete a word *daw* "diW" delete inner WORD (see |WORD|) *diW* "daW" delete a WORD (see |WORD|) *daW* "dd" delete one line |dd| "dis" delete inner sentence *dis* "das" delete a sentence *das* "dib" delete inner '(' ')' block *dib* "dab" delete a '(' ')' block *dab* "dip" delete inner paragraph *dip* "dap" delete a paragraph *dap* "diB" delete inner '{' '}' block *diB* "daB" delete a '{' '}' block *daB*Notethe difference between using a movement command and an object. The movement command operates from here (cursor position) to where the movement takes us. When using an object the whole object is operated upon, no matter where on the object the cursor is. For example, compare "dw" and "daw": "dw" deletes from the cursor position to the start of the next word, "daw" deletes the word under the cursor and the space after or before it.
7. Marks *mark-motions* *E20* *E78* Jumping to a mark can be done in two ways: 1. With ` (backtick): The cursor is positioned at the specified location and the motion is |exclusive|. 2. With ' (single quote): The cursor is positioned on the first non-blank character in the line of the specified location and the motion is linewise. *m* *mark* *Mark* m{a-zA-Z}Set mark{a-zA-Z}at cursor position (does not move the cursor, this is not a motion command). *m'* *m`* m' or m` Set the previous context mark. This can be jumped to with the "''" or "``" command (does not move the cursor, this is not a motion command). *m[* *m]* m[ or m] Set the |'[| or |']| mark. Useful when an operator is to be simulated by multiple commands. (does not move the cursor, this is not a motion command). *:ma* *:mark* *E191* :[range]ma[rk]{a-zA-Z}Set mark{a-zA-Z}at last line number in[range], column 0. Default is cursor line. *:k* :[range]k{a-zA-Z}Same as :mark, but the space before the mark name can be omitted. *'* *'a* *`* *`a* '{a-z}`{a-z}Jump to the mark{a-z}. *'A* *'0* *`A* *`0* '{A-Z0-9}`{A-Z0-9}To the mark{A-Z0-9}in the correct file (not a motion command when in another file).{not in Vi}*g'* *g'a* *g`* *g`a* g'{mark}g`{mark}Jump to the{mark}, but don't change the jumplist when jumping within the current buffer. Example:g`"jumps to the last known position in a file. See $VIMRUNTIME/vimrc_example.vim.{not in Vi}*:marks* :marks List all the current marks (not a motion command). The |'(|, |')|, |'{| and |'}| marks are not listed.{not in Vi}*E283* :marks{arg}List the marks that are mentioned in{arg}(not a motion command). For example::marks aBto list marks 'a' and 'B'.{not in Vi}A mark is not visible in any way. It is just a position in the file that is remembered. Do not confuse marks with named registers, they are totally unrelated. 'a - 'z lowercase marks, valid within one file 'A - 'Z uppercase marks, also called file marks, valid between files '0 - '9 numbered marks, set from .viminfo file Lowercase marks 'a to 'z are remembered as long as the file remains in the buffer list. If you remove the file from the buffer list, all its marks are lost. If you delete a line that contains a mark, that mark is erased. To delete a mark: Create a new line, position the mark there, delete the line. E.g.: "o<Esc>mxdd". This does change the file though. Using "u" won't work, it also restores marks. Lowercase marks can be used in combination with operators. For example: "d't" deletes the lines from the cursor position to mark 't'. Hint: Use mark 't' for Top, 'b' for Bottom, etc.. Lowercase marks are restored when using undo and redo. Uppercase marks 'A to 'Z include the file name.{Vi: no uppercase marks}You can use them to jump from file to file. You can only use an uppercase mark with an operator if the mark is in the current file. The line number of the mark remains correct, even if you insert/delete lines or edit another file for a moment. When the 'viminfo' option is not empty, uppercase marks are kept in the .viminfo file. See |viminfo-file-marks|. Numbered marks '0 to '9 are quite different. They can not be set directly. They are only present when using a viminfo file |viminfo-file|. Basically '0 is the location of the cursor when you last exited Vim, '1 the last but one time, etc. Use the "r" flag in 'viminfo' to specify files for which no Numbered mark should be stored. See |viminfo-file-marks|. *'[* *`[* '[ `[ To the first character of the previously changed or yanked text.{not in Vi}*']* *`]* '] `] To the last character of the previously changed or yanked text.{not in Vi}After executing an operator the Cursor is put at the beginning of the text that was operated upon. After a put command ("p" or "P") the cursor is sometimes placed at the first inserted line and sometimes on the last inserted character. The four commands above put the cursor at either end. Example: After yanking 10 lines you want to go to the last one of them: "10Y']". After inserting several lines with the "p" command you want to jump to the lowest inserted line: "p']". This also works for text that has been inserted.Note:After deleting text, the start and end positions are the same, except when using blockwise Visual mode. These commands do not work when no change was made yet in the current file. *'<* *`<* '< `< To the first character of the last selected Visual area in the current buffer.{not in Vi}. *'>* *`>* '> `> To the last character of the last selected Visual area in the current buffer.{not in Vi}. *''* *``* '' `` To the position before latest jump, or where the last "m'" or "m`" command was given. Not set when the |:keepjumps| command modifier was used. Also see |restore-position|. *'quote* *`quote* '" `" To the cursor position when last exiting the current buffer. Defaults to the first character of the first line. See |last-position-jump| for how to use this for each opened file. Only one position is remembered per buffer, not one for each window. As long as the buffer is visible in a window the position won't be changed.{not in Vi}. *'^* *`^* '^ `^ To the position where the cursor was the last time when Insert mode was stopped This is used by the |gi| command. Not set when the |:keepjumps| command modifier was used.{not in Vi}*'.* *`.* '. `. To the position where the last change was made. The position is at or near where the change started. Sometimes a command is executed as several changes, then the position can be near the end of what the command changed. For example when inserting a word, the position will be on the last character.{not in Vi}*'(* *`(* '( `( To the start of the current sentence, like the |(| command.{not in Vi}*')* *`)* ') `) To the end of the current sentence, like the |)| command.{not in Vi}*'{* *`{* '{ `{ To the start of the current paragraph, like the |{| command.{not in Vi}*'}* *`}* '} `} To the end of the current paragraph, like the |}| command.{not in Vi}These commands are not marks themselves, but jump to a mark: *]'* ]'[count]times to next line with a lowercase mark below the cursor, on the first non-blank character in the line.{not in Vi}*]`* ]`[count]times to lowercase mark after the cursor. {not in Vi} *['* ['[count]times to previous line with a lowercase mark before the cursor, on the first non-blank character in the line.{not in Vi}*[`* [`[count]times to lowercase mark before the cursor.{not in Vi}:loc[kmarks]{command}*:loc* *:lockmarks* Execute{command}without adjusting marks. This is useful when changing text in a way that the line count will be the same when the change has completed. WARNING: When the line count does change, marks below the change will keep their line number, thus move to another text line. These items will not be adjusted for deleted/inserted lines: - lower case letter marks 'a - 'z - upper case letter marks 'A - 'Z - numbered marks '0 - '9 - last insert position '^ - last change position '. - the Visual area '< and '>- line numbers in placed signs - line numbers in quickfix positions - positions in the |jumplist| - positions in the |tagstack| These items will still be adjusted: - previous context mark '' - the cursor position - the view of a window on a buffer - folds - diffs :kee[pmarks]{command}*:kee* *:keepmarks* Currently only has effect for the filter command |:range!|: - When the number of lines after filtering is equal to or larger than before, all marks are kept at the same line number. - When the number of lines decreases, the marks in the ilnes that disappeared are deleted. In any case the marks below the filtered text have their line numbers adjusted, thus stick to the text, as usual. When the 'R' flag is missing from 'cpoptions' this has the same effect as using ":keepmarks". *:keepj* *:keepjumps* :keepj[umps]{command}Do not change the |''|, |'.| and |'^| marks, the |jumplist| or the |changelist|. Useful when making a change or inserting text automatically and the user doesn't want to go to this position. E.g., when updating a "Last change" timestamp:autocmd BufWritePre,FileWritePre *.abc keepjumps call SetLastChange()
8. Jumps *jump-motions*
A "jump" is one of the following commands: "'", "`", "G", "/", "?", "n",
"N", "%", "(", ")", "[[", "]]", "{", "}", ":s", ":tag", "L", "M", "H" and
the commands that start editing a new file. If you make the cursor "jump"
with one of these commands, the position of the cursor before the jump is
remembered. You can return to that position with the "''" and "``" command,
unless the line containing that position was changed or deleted.
*CTRL-O*
CTRL-O Go to [count] Older cursor position in jump list
(not a motion command). {not in Vi}
{not available without the +jumplist feature}
<Tab> or *CTRL-I* *<Tab>*
CTRL-I Go to [count] newer cursor position in jump list
(not a motion command).
In a |quickfix-window| it takes you to the position of
the error under the cursor.
{not in Vi}
{not available without the +jumplist feature}
*:ju* *:jumps*
:ju[mps] Print the jump list (not a motion command). {not in
Vi} {not available without the +jumplist feature}
*jumplist*
Jumps are remembered in a jump list. With the CTRL-O and CTRL-I command you
can go to cursor positions before older jumps, and back again. Thus you can
move up and down the list. There is a separate jump list for each window.
The maximum number of entries is fixed at 100.
{not available without the +jumplist feature}
For example, after three jump commands you have this jump list:
jump line col file/line
3 1 0 some text
2 70 0 another line
1 1154 23 end.
>
The "file/line" column shows the file name, or the text at the jump if it is
in the current file (an indent is removed and a long line is truncated to fit
in the window).
You are currently in line 1167. If you then use the CTRL-O command, the
cursor is put in line 1154. This results in:
jump line col file/line
2 1 0 some text
1 70 0 another line
> 0 1154 23 end.
1 1167 0 foo bar
The pointer will be set at the last used jump position. The next CTRL-O
command will use the entry above it, the next CTRL-I command will use the
entry below it. If the pointer is below the last entry, this indicates that
you did not use a CTRL-I or CTRL-O before. In this case the CTRL-O command
will cause the cursor position to be added to the jump list, so you can get
back to the position before the CTRL-O. In this case this is line 1167.
With more CTRL-O commands you will go to lines 70 and 1. If you use CTRL-I
you can go back to 1154 and 1167 again. Note that the number in the "jump"
column indicates the count for the CTRL-O or CTRL-I command that takes you to
this position.
If you use a jump command, the current line number is inserted at the end of
the jump list. If the same line was already in the jump list, it is removed.
The result is that when repeating CTRL-O you will get back to old positions
only once.
When the |:keepjumps| command modifier is used, jumps are not stored in the
jumplist.
After the CTRL-O command that got you into line 1154 you could give another
jump command (e.g., "G"). The jump list would then become:
jump line col file/line
4 1 0 some text
3 70 0 another line
2 1167 0 foo bar
1 1154 23 end.
>
The line numbers will be adjusted for deleted and inserted lines. This fails
if you stop editing a file without writing, like with ":n!".
When you split a window, the jumplist will be copied to the new window.
If you have included the ' item in the 'viminfo' option the jumplist will be
stored in the viminfo file and restored when starting Vim.
CHANGE LIST JUMPS *changelist* *change-list-jumps* *E664*
When making a change the cursor position is remembered. One position is
remembered for every change that can be undone, unless it is close to a
previous change. Two commands can be used to jump to positions of changes,
also those that have been undone:
*g;* *E662*
g; Go to [count] older position in change list.
If [count] is larger than the number of older change
positions go to the oldest change.
If there is no older change an error message is given.
(not a motion command)
{not in Vi}
{not available without the +jumplist feature}
*g,* *E663*
g, Go to [count] newer cursor position in change list.
Just like "g;| but in the opposite direction.
(not a motion command)
{not in Vi}
{not available without the +jumplist feature}
When using a count you jump as far back or forward as possible. Thus you can
use "999g;" to go to the first change for which the position is still
remembered. The number of entries in the change list is fixed and is the same
as for the |jumplist|.
When two undo-able changes are in the same line and at a column position less
than 'textwidth' apart only the last one is remembered. This avoids that a
sequence of small changes in a line, for example "xxxxx", adds many positions
to the change list. When 'textwidth' is zero 'wrapmargin' is used. When that
also isn't set a fixed number of 79 is used. Detail: For the computations
bytes are used, not characters, to avoid a speed penalty (this only matters
for multi-byte encodings).
Note that when text has been inserted or deleted the cursor position might be
a bit different from the position of the change. Especially when lines have
been deleted.
When the |:keepjumps| command modifier is used the position of a change is not
remembered.
*:changes*
:changes Print the change list. A ">" character indicates the
current position. Just after a change it is below the
newest entry, indicating that "g;" takes you to the
newest entry position. The first column indicates the
count needed to take you to this position. Example:
change line col text
3 9 8 bla bla bla
2 11 57 foo is a bar
1 14 54 the latest changed line
The "3g;" command takes you to line 9. Then the
output of ":changes is:
change line col text > 0 9 8 bla bla bla
1 11 57 foo is a bar
2 14 54 the latest changed line
Now you can use "g," to go to line 11 and "2g," to go
to line 14.
9. Various motions *various-motions* *%* % Find the next item in this line after or under the cursor and jump to its match. |inclusive| motion. Items can be: ([{}]) parenthesis or (curly/square) brackets (this can be changed with the 'matchpairs' option) /* */ start or end of C-style comment #if, #ifdef, #else, #elif, #endif C preprocessor conditionals (when the cursor is on the # or no ([{ following) For other items the matchit plugin can be used, see |matchit-install|. When 'cpoptions' contains "M" |cpo-M| backslashes before parens and braces are ignored. Without "M" the number of backslashes matters: an even number doesn't match with an odd number. Thus in "( \) )" and "\( ( \)" the first and last parenthesis match. When the '%' character is not present in 'cpoptions' |cpo-%|, parens and braces inside double quotes are ignored, unless the number of parens/braces in a line is uneven and this line and the previous one does not end in a backslash. '(', '{', '[', ']', '}' and ')' are also ignored (parens and braces inside single quotes).Notethat this works fine for C, but not for Perl, where single quotes are used for strings. No count is allowed ({count}% jumps to a line{count}percentage down the file |N%|). Using '%' on #if/#else/#endif makes the movement linewise. *[(* [( go to[count]previous unmatched '('. |exclusive| motion.{not in Vi}*[{* [{ go to[count]previous unmatched '{'. |exclusive| motion.{not in Vi}*])* ]) go to[count]next unmatched ')'. |exclusive| motion.{not in Vi}*]}* ]} go to[count]next unmatched '}'. |exclusive| motion.{not in Vi}The above four commands can be used to go to the start or end of the current code block. It is like doing "%" on the '(', ')', '{' or '}' at the other end of the code block, but you can do this from anywhere in the code block. Very useful for C programs. Example: When standing on "case x:", "[{" will bring you back to the switch statement. *]m* ]m Go to[count]next start of a method (for Java or similar structured language). When not before the start of a method, jump to the start or end of the class. When no '{' is found after the cursor, this is an error. |exclusive| motion.{not in Vi}*]M* ]M Go to[count]next end of a method (for Java or similar structured language). When not before the end of a method, jump to the start or end of the class. When no '}' is found after the cursor, this is an error. |exclusive| motion.{not in Vi}*[m* [m Go to[count]previous start of a method (for Java or similar structured language). When not after the start of a method, jump to the start or end of the class. When no '{' is found before the cursor this is an error. |exclusive| motion.{not in Vi}*[M* [M Go to[count]previous end of a method (for Java or similar structured language). When not after the end of a method, jump to the start or end of the class. When no '}' is found before the cursor this is an error. |exclusive| motion.{not in Vi}The above two commands assume that the file contains a class with methods. The class definition is surrounded in '{' and '}'. Each method in the class is also surrounded with '{' and '}'. This applies to the Java language. The file looks like this:// commentclass foo {int method_one() {body_one();}int method_two() {body_two();}}Starting with the cursor on "body_two()", using "[m" will jump to the '{' at the start of "method_two()" (obviously this is much more useful when the method is long!). Using "2[m" will jump to the start of "method_one()". Using "3[m" will jump to the start of the class. *[#* [# go to[count]previous unmatched "#if" or "#else". |exclusive| motion.{not in Vi}*]#* ]# go to[count]next unmatched "#else" or "#endif". |exclusive| motion.{not in Vi}These two commands work in C programs that contain #if/#else/#endif constructs. It brings you to the start or end of the #if/#else/#endif where the current line is included. You can then use "%" to go to the matching line. *[star* *[/* [* or [/ go to [count] previous start of a C comment "/*". |exclusive| motion.{not in Vi}*]star* *]/* ]* or ]/ go to [count] next end of a C comment "*/". |exclusive| motion.{not in Vi}*H* H To line[count]from top (Home) of window (default: first line on the window) on the first non-blank character |linewise|. See also 'startofline' option. Cursor is adjusted for 'scrolloff' option. *M* M To Middle line of window, on the first non-blank character |linewise|. See also 'startofline' option. *L* L To line[count]from bottom of window (default: Last line on the window) on the first non-blank character |linewise|. See also 'startofline' option. Cursor is adjusted for 'scrolloff' option.<LeftMouse>Moves to the position on the screen where the mouse click is |inclusive|. See also |<LeftMouse>|. If the position is in a status line, that window is made the active window and the cursor is not moved.{not in Vi}vim:tw=78:ts=8:ft=help:norl:
Generated by vim2html on Tue Oct 12 19:10:57 CEST 2004